Filter
Top Products
Operate the primer bulb: When starting the engine for the
first time firmly push the primer bulb 5 times at 2 second
intervals to provide the extra fuel required to start a cold
engine. When starting a cold engine thereafter it should
only be necessary to push the primer bulb 3 times.
Operation of the primer bulb is usually unnecessary when
starting a warm engine.
Operate the engine stop lever: Use one hand to hold the
engine stop lever in the operating position firmly against the
handlebar.
To start and operate the engine, the engine stop lever must
be held in the operating position. If the engine stop lever is
released the engine will stop.
Operate the engine start-grip: Stand behind the mower
and maintain a firm hold on the handlebar and the engine
stop lever to prevent the mower moving towards you. Use
your right hand to hold the engine start - grip and pull slow-
ly until resistance is felt, then pull rapidly to crank the
engine. When the engine starts carefully return the engine
start - grip to the storage position. If the engine does not
start after 5 attempts - refer to “Fault Finding”.
IMPORTANT - PREVENT ENGINE DAMAGE: Never
pull the engine start - grip when the engine is running.
STARTING THE ENGINE
401001EB100398A
1.17
1.17
TO START THE ENGINE
ST003
1
2
CS117
1. Engine
2. Primer Bulb
ST004
STOP