Hayter Mowers 185E XR16 Lawn Mower User Manual


 
1.6
INTRODUCTION
Thank you for purchasing an Allen machine. The following pages are designed to help you
gain safe and efficient service from your machine.
IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives
essential information regarding mower safety, operation, maintenance and specifications. Read
and understand this handbook prior to operating your machine for the first time. Make sure you
are familiar with all the controls and points of regular maintenance. If you have any doubts,
consult your local authorised dealer who will be pleased to give you assistance.
IMPORTANT: This machine is designed solely for cutting grass and other low lying ground
vegetation within the limitations stated in this manual. Use in any other way is considered as
contrary to the intended use. Compliance with and strict adherence to the conditions of opera-
tion, service and repair as specified in this handbook also constitute essential elements of the
intended use.
This machine should be operated, serviced and repaired only by persons who are familiar with
its particular characteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed in this handbook and all other generally recognised regulations on
safety must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of
liability for any resulting damage or injury.
Allen machines are robustly constructed and designed for efficient economical
performance under normal mowing conditions. Correct operation and maintenance will ensure
a long and satisfactory service life. Prior to despatch from our factory every effort is made to
ensure that your mower is delivered in perfect condition.
Throughout this handbook all references to left and right are as viewed from behind the han-
dlebar, in the direction of forward travel.
This handbook is based on information available at the time of publication.
We reserve the right to amend product specifications without prior notification.
111-1519 (A) 28/1/08 4:44 pm Page 1.6