Filter
Top Products
PROBLEM POSSIBLE FAULT REMEDY
Engine vibrates excessively Mounting bolts loose. Tighten bolts
Cutter disc bolt loose. Tighten bolt
Bent crankshaft. Consult your dealer
Damaged impeller or cutter disc Consult your dealer
Uneven cut Flexiblade out of balance Replace flexiblade
Engine running slow Consult your dealer
Impeller air vents blocked Check and unblock
Poor hovering
Underdeck not clean Clean
Cutter disc loose Tighten bolts
TROUBLE
SHOOTING
1.23
111-1519 (A) 28/1/08 4:44 pm Page 1.23