Filter
Top Products
GB
11
1740520
CONTENTS
LIMITED WARRANTY 10
INTERNATIONAL PICTORIALS 11
OWNER’S INFORMATION 12
SAFE OPERATION PRACTICES 12
ASSEMBLY 13
OPERATION 14
MAINTENANCE 15
TROUBLE SHOOTING CHART 19
INTERNATIONAL PICTORIALS
IMPORTANT: The following pictorials are lo-
cated on your unit or on literature supplied
with the product. Before you operate the
unit, learn and understand the purpose for
each pictorial.
NOTE: Illustrations and pictorials begin
on page 2.
Safety Warning Pictorials (Figure 37)
1 WARNING
2 IMPORTANT: Read Owner’s Manual
Before Operating This Machine.
3 WARNING: Thrown Objects. K eep
Bystanders Away. Read User Instructions
Before Operating This Machine.
4 WARNING: Do Not Use This Machine On
Slopes Greater Than 10 Degrees.
5 DANGER: Keep People, Especially
Children, Away From Unit.
6 DANGER: No Step.
7 DANGER: Keep Feet And Hands Away
From Rotating Blade.
8 Declared airborne sound power level of 100
dB(A) is in accordance with Directive
2000/14/EC.
9 DANGER: Disconnect Spark Plug Wire
Before Servicing Unit.
10 WARNING: Hot Surface.
11 WARNING: Maximum Loading When Using
Attachments.
12 WARNING: Crushed Fingers.
13 IMPORTANT: Follow Instructions In
Owner’s Manual To Level The Deck.
14 WARNING: Stay Clear Of Mower Blade As
Long As Engine Is Running.
Control And Operating Pictorials
(Figure 38)
1 Engine Start
2 Lights
3 Engine Run
4 Engine Stop
5 Engine Run
6 Brake
7 Parking Brake
8 Clutch
9 Slow
10 Fast
11 Choke
12 Oil
13 Blade Rotation Control
14 Raise
15 Fuel
Declared vibration emission values in accordance with Directive 98/37/EC.
Vibration Emission according to BS EN 1032: Seat 1,64
m/s
2
,
Right Running Board 2,19 m/s
2
, Left Running Board 2,90 m/s
2
Vibration Emission according to BS EN 1033: Steering Wheel 4,39 m/s
2
Values determined with operator in operating position when the machine was
operated stationary on a concrete surface at 2850 min--1.
Declared airborne noise emissions in accordance with Directive 2000/14/EC,
Annex VI.
Sound Pressure Level at operator position 86
dB.
Values determined at ear according to the specifications of EN ISO 11201.
Assembled i nUSAby Swisherfor
Briggs&StrattonCorporation
2850182 6.4
13/30
270000001
131E
2007