Filter
Top Products
Page 4SKU 99835 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Materials Application
Removing and
reinstalling pins in
chainsaw chains
Anvil Sizes
1/4”, 0.325”, 3/8”,
0.404”, 7/16” and
1/2” Pitch.
UNPACKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
SET UP INSTRUCTIONS
Read the ENTIRE
IMPORTANT SAFETY
INSTRUCTIONS section at the
beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Assembly
This tool must be bench mounted be-1.
fore use. To bench mount, choose an
appropriate work bench for mounting.
The workbench must be solid, level
and strong enough to support the
weight of the tool, the work material,
and pressure applied to the tool dur-
ing chain breaking and rivet spinning.
Use the Tool Base (1) as a template 2.
to mark the bench top. Drill two 5/16”
holes for mounting bolts (not includ-
ed), being careful not to drill into any
hidden electric or utility lines. Mount
the Base using bolts, washers and
nuts (not included); tighten securely.
Mount the Breaker Lever (3) into the 3.
Breaker Cam (15). Secure the Lever
in place using one Hex Set Screw
(18). Be sure Lever and Cam turn
freely, then tighten screw securely us-
ing included Hex Wrench (20).
Insert the Breaker Punch (19) into the 4.
Tool Holder (21). Hold in place using
one Hex Screw (18). Tighten securely
using included Hex Wrench (20).
Functions
This tool is intended to break apart 1.
and reassemble chains for chain
saws.
Available Accessories/
Attachments
Use of any
accessory or
attachment other
than those listed below may
increase the risk of serious
injury.
This Tool includes two sets of Dies for 1.
spinning the chain rivets. These are
to t the diameter of your chain rivets.