Filter
Top Products
SKU 99621 For technical questions, please call 1-800-444-3353. Page 7
Troubleshooting
Problem Possible Causes Likely Solutions
Control Handle will
not open/close Gauge
Assembly.
Material clogging port of Gauge 1.
Assembly (22) and/or Adjustment
Plate (13).
Check both Gauge Assembly (22) 1.
and Adjustment Plate (13) and clear
debris if necessary.
Material not spreading
at proper rate.
Wrong opening on Gauge Assembly 1.
(22).
Loosen Thumb Wing Nut (24) and 1.
open/close accordingly and re-
adjust if necessary.
Follow all safety precautions whenever diagnosing or servicing the
appliance. Turn off ATV and remove Spreader from vehicle before
service.
PARTS LIST
Part # Description Q’ty Part # Description Q’ty
1 Rain Cover 1 20 Hex Bolt M6X30 1
2 Electric Motor Lid 1 21 Frame Rail 2
3 Electric Motor 1 22 Gauge Assembly 1
4 Electric Motor Cover 1 23 Spacer 1
5 Tie 1 24 Thumb Wing Nut M6 2
6 Unlock Nut 2 25 Control Handle 1
7 Motor Support 1 26 Wire Adjustment Clip B 1
8 Hopper Assembly 1 27 Wood Screw M4.5X18 2
9 Flat Washer 4 28 Adjustment Wire 1
10 Hex Bolt M6X15 2 29 Phillips Screw M6X15 2
11 Wire Clamp 1 30 Lock Washer 2
12 Wire Adjustment Clip A 1 31 Switch Box Assembly 1
13 Adjustment Plate 1 31-1 Fuse 1
14 Screw M5X35 4 31-2 Switch 1
15 Center Spacer 1 31-3 ATV Battery Terminals 1
16 Turning Plate 1 31-4 Motor Terminal 1
17 Wood Screw M4.5X10 3 32 Hex Nut M6 8
18 Phillips Screw M4X20 1 33 Press Plate 4
19 Phillips Screws M6X45 1 34 J-Bolt 8
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not avail-
able individually as replacement parts.
REV 08g