Filter
Top Products
SKU 99621 For technical questions, please call 1-800-444-3353. Page 3
9. Wear thick jeans and
steel-toed work boots to
help prevent injury
caused by ying debris.
Stay alert - Watch what you are 10.
doing. Use common sense. Do not
operate ATV Spreader when you are
tired.
11. Do not grasp the exposed
Turning Plate (16) edges
when picking up or hold-
ing the Spreader.
Do not Use In Rain, or damp loca-12.
tions.
All visitors should be kept at a dis-13.
tance from work area.
When servicing use only identical 14.
replacement parts.
Store Idle ATV Spreader Indoors, out 15.
of reach of children.
Maintain ATV Spreader With Care. 16.
Follow instructions for lubrication.
Check for damaged parts. If anything
irregular is found, the damage should
be properly repaired by a qualied
technician unless indicated else-
where in this manual.
Disconnect the ATV Spreader when 17.
not in use and/or before servicing.
Specic Safety Rules
Care must be taken when lifting this 1.
ATV Spreader so as not to cause
equipment damage and/or personal
injury.
Remove any material in Hopper As-2.
sembly (8) before removing this ATV
Spreader from the vehicle.
Never attempt to install this ATV 3.
Spreader to the ATV vehicle alone.
Have another adult assist when at-
taching or detaching.
Refer to the material packaging, or 4.
bag safety instructions when handling
all materials to be applied with this
Spreader.
Before attaching this ATV Spreader, 5.
consideration must be given to the
load capacity of the vehicle to be
loaded. Be sure to account for the
weight of this Spreader and the
weight of the material being spread.
Maintain labels and nameplates on 6.
the appliance. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
The warnings, precautions, and in-7.
structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTRUCTIONS.
SPECIFICATIONS
Hopper
Assembly
Capacity
80 LB. Weight capacity.
1900 cu. in. Storage capacity
Drive Motor 12V Electric