Filter
Top Products
Page 3SKU 95781
For technical questions, please call 1-800-444-3353.
grounding prong or modify the plug in any way. Do not use any adapter plugs.
Check with a qualified electrician if you are in doubt as to whether the outlet
is properly grounded. If the product should electrically malfunction or break down,
grounding provides a low resistance path to carry electricity away from the user.
Double insulated products are equipped with a polarized plug (one blade is
wider than the other). This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a polarized outlet. Do not change
the plug in any way. Double insulation eliminates the need for the three wire
grounded power cord and grounded power supply system.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
Do not expose the AC/DC Adapter of this product to rain or wet conditions.
Water entering the Adapter will increase the risk of electric shock.
Do not abuse the Power Cord. Never use the Power Cord to carry this prod-
uct or pull the Plug from an outlet. Keep the Power Cord away from heat, oil,
sharp edges, or moving parts. Replace damaged Power Cords immediately.
Damaged Power Cords increase the risk of electric shock.
When operating a power tool outside, use an outdoor extension cord marked
“W-A” or “W”. These extension cords are rated for outdoor use, and reduce the
risk of electric shock.
PERSONAL SAFETY
Stay alert. Watch what you are doing, and use common sense when operat-
ing this product. Do not use this product while tired or under the influence of
drugs, alcohol, or medication. A moment of inattention while operating electrically
powered products may result in serious personal injury.
Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the power tool in unexpected situations.
Use safety equipment. Wear ANSI approved safety eye goggles when assem-
bling this product.
PRODUCT USE AND CARE
Do not force this product. Use the correct product for your application. The
correct product will do the job better and safer at the rate for which it is designed.
Do not force this product and do not use this product for a purpose for which it is
not intended.
2.
3.
4.
5.
6.
1.
2.
3.
1.