Filter
Top Products
SKU 95619 For technical questions please call 1-800-444-3353 Page 7
Assembly
NOTE: Please refer to the photo below and the table and diagram on pages 13
and 14 when reading this section and assembling your pressure washer.
1. Attach the Cart Handle (16) to the Cart Frame (5) as shown in the photo
below. Secure in place using the Handle Locking Knobs (23) with Flat
Washers (21) and Spring Washers (22). Tighten Securely.
2. Attach the Wheels (4) to the Cart Frame (5) using the Lock Nuts (2) and Flat
Washers (3). Press Wheel Covers (1) in place to cover axle ends.
3. Connect the High Pressure Hose (38) to the High Pressure Pump (24) by
screwing in place clockwise. Secure tightly.
4. Attach High Pressure Hose (38) to Spray Gun Handle (37) by screwing
clockwise. Tighten securely.
5. Coil the High Pressure Hose (38) and hang it on the Hose Bracket (8). Hang
the Spray Gun on the Gun Bracket (14).
6. Connect a garden hose water supply to the garden hose connector.
07d
Spray Nozzle