SKU 95619 For technical questions please call 1-800-444-3353 Page 2
Specifications
Gas Engine
4HP OHC Mitsubishi Engine, 3600 RPM, Recoil Start, Uses Unleaded Fuel,
20 Oz. Engine Oil Capacity, 6.25 Gal. Fuel Capacity (2.5L).
Environmental Approved by E.P.A. (Environmental Protection Agency)
Pressure Washer 2200 PSI Rated, Cast Iron Cylinder Sleeve, Brass Axial Pump
Pump Dimensions 25-½”L x 19-3/8”W x 33-¾”T
Washer Gun Safety Trigger Activated; for Cold Water use only
Water Output 2.3 Gallons per Minute
High Pressure Hose 27 Foot Long High Pressure Hose
Cart and Wheels Built in Cart with 8”D x 2” Wheels
Features
Standard Garden Hose Connector for Water Supply
Thermal Overload Protection and Unloader Valve on Pressure Washer
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment. Read
and adhere to all warnings and safety precautions before use.
Read all instructions before using this tool!
1. Carbon Monoxide Hazard. Operate pressure washer in well ventilated
area only. Carbon Monoxide is created when engine is running and is a
DEADLY gas when inhaled. Carbon Monoxide is a colorless, odorless gas.
Early signs of Carbon Monoxide poisoning resemble Flu symptoms such
as headache, dizziness or nausea. If you notice these signs, turn off engine and
immediately move to a well ventilated area.
2. Fire Hazard. Do not ll gas tank when engine is running or hot. Do not
operate engine near spilled gasoline. Clean spilled gasoline before starting
engine. Do not store or handle gasoline near pilot light, electrical equip-
ment or open ame. Do not smoke near gasoline. Gasoline fuel and
fumes are ammable and potentially explosive. Use proper fuel handling proce-
dures. Always have multiple ABC class re extinguishers in the area when handling
fuel.
3. Injection Hazard. The high pressure water jet produced by this tool can
cut skin or cause injury to hands or eyes. Do not allow spray to strike you
and do not spray toward people or animals. Do not spray the tool itself or
any electrical source.
REV 07c