Filter
Top Products
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
SKU 92281
PAGE 2For technical questions, please call 1-800-444-3353.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts Lists on page 16
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
IMPORTANT SAFETY INSTRUCTIONS
Item Description
Electrical Requirements
115 V / 60 Hz / 2000 Watt
4.15 AMPs (No Load) / 5.20 AMPs (With Load)
2.5 HP / Single Phase / 3460 RPM
3-Prong Power Plug / Power Cord Length: 15”
Power Switch Type: ON/OFF Sliding
Safety Shut-Off Switch Equipped: Yes
Circuit Breaker Type: Push Button
Chipper/Shredder Capacity Tree Limbs Up To 1-1/4” Diameter
Blade Quantity/Type 2 / Reversible / High Speed Steel Construction
Discharge Chute Size 11-3/8” L x 4-3/4” W
Opening Size 11” L x 8-3/4” W
Wheel Size 7” Diameter x 1-3/4” W
Accessories Feed Stick (Qty. 1)
Wrenches Included 5mm Allen Wrench (Qty. 1) / 6mm Allen Wrench (Qty. 1)
13mm Double End Wrench (Qty. 1) / 16mm Double End Wrench (Qty. 1)
Overall Dimensions 36-5/8” H x 18” W x 21-1/2” L
Weight 50 Pounds