Filter
Top Products
and turn the Power Switch to its “ON” position to resume cutting.
NEVER attempt to disable the Circuit Breaker. (See Figure H.)
11. NOTE: The Motor is equipped with a Safety Shut-Off Switch (42) located on the
top portion of the Motor Support (26). Should the Motor not restart, check to
make sure the Body (13) is firmly secured to the Motor Support. If necessary,
retighten the Knob (7) to ensure a solid connection between the Body and Motor
Support. (See Figure E.)
12. When finished using the Chipper/Shredder, turn the Power Switch (47) to its
“OFF” position. Unplug the Power Cord (58) from its extension cord. Then,
unplug the extension cord from its electrical outlet. (See Figure H.)
13. Wait until all moving parts on the Chipper/Shredder have stopped moving. Then
open the unit and clean out the Hopper (1), Body (13), Motor Support (26), and
Chute (32). (See Figure H.)
14. Make sure to store the Chipper/Shredder in a clean, dry, safe location out of
reach of children and other unauthorized people.
SKU 92281 For technical questions, please call 1-800-444-3353. PAGE 14
FIGURE H
HOPPER (1)
BODY (13)
FEED STICK (59)
POWER
SWITCH
(47)
CIRCUIT
BREAKER
(49)
POWER
CORD
(58)
MOTOR
SUPPORT
(26)
CHUTE
(32)