Filter
Top Products
Page 7For technical questions, please call 1-800-444-3353.SKU 68333
Assembly
1. Snap the Body onto
the Base until it clicks
into place.
2. Attach the
Handle to
the front of
the Body
with four of
the Screws.
3. Attach the Strap for
the Soap
Dispenser to the
Base with the
remaining two
Screws.
4. Thread the High
Pressure Hose
onto the Pressure
Hose Outlet on the
front of the body.
5. Snap the High Pressure Hose
to the Spray Gun until it clicks
in place.
6. Place the Water
Filter in the
Water Supply
Inlet and thread
the adapter
onto the Inlet.
Note: To remove the Pressure Hose from the Spray Gun, press and hold the hose release button on the side of the
Spray Gun and pull out the hose.