Filter
Top Products
23
MAINTENANCE
Fig. 17
Fig. 16
TAKING A BREAK
Engage gun safety lock.
Turn unit to “OFF” (O) position.
Unplug the power cord from the outlet.
CAUTION:
The use of a pump protector is recommended to prevent cold weather damage during storage
over the winter months.
WALL MOUNTING INSTALLATION (See Figure 16.)
.
Mark a level line on the wall.
Mark the position of the holes on the studs
Mount a desired wall bracket (not included) onto the studs.
After fastening, make sure the wall bracket is level, and securely mounted on the wall.
IMPORTANT
DO NOT USE PRESSURE WASHER WHILE IN WALL MOUNTED POSITION
Telescopic handle use: (See Figure 17.)
Pull up and fully extend handle for use.
For transporting, pull as shown.
To lower handle; push handle until it lock into place for storage.
IMPORTANT
This handle is for pulling the unit. Do not lift the unit by this handle.