Great Dane GSKH2352S Lawn Mower User Manual


 
Operating - 8
OPERATING
K-Choke
L-Throttle Lever
M-Park Brake Lever
Mower Deck Controls
c
MX20093
A-Mower Deck Lift Levers
B-Height-of-Cut (HOC) Pin
Miscellaneous Controls
c
MX20094
A-Free-Wheeling Valves
Mounting and Dismounting Machine Safely
c
MX20095
1. Step on operator’s platform (A) at the rear of machine to mount the
machine.
2. Park machine safely. (See Parking Safely in the SAFETY section.)
3. Step off operator’s platform to dismount machine.
4. Keep operator’s platform and suspension springs clean and free of
debris.
Raising and Lowering Thigh Pad
1. Park machine safely. (See Parking Safely in the SAFETY section.)
c
MX20096
2. Raise and lower thigh pad (A) as required.
Adjusting Mower Deck Cutting Height
The mower deck height adjustment consists of seven different cutting
heights. The cutting heights range from 38-114 mm (1-1/2-4-1/2 in.) in 13
mm (1/2 in.) increments.
c
1. Park machine safely. (See Parking Safely in the SAFETY section.)
2. Disengage PTO.
CAUTION: Avoid injury! Before adjusting cutting height,
stop engine and lock the park brake.