GB - 25
SHORT TERM
NEVER spray unit with high pressure water or store unit
outdoors.
Inspect unit for visible signs of wear, breakage or damage.
Keep all nuts, bolts and screws properly tightened and know
unit is in safe working condition.
Store unit in a cool, dry protected area.
LONG TERM
Clean unit thoroughly with mild soap and low pressure water
and lubricate (See LUBRICATE UNIT on page 19 in
Maintenance). Touch up all scratched painted surfaces.
Remove weight from wheels by putting blocks under frame
or axle.
When storing unit for extended periods of time, remove all
fuel from tank and carburetor (run dry). Refer to Engine
Manual.
Clean and charge the battery. Charge battery every three to
four weeks when storing unit.
To Take the Unit Out of Storage
1. Refer to the engine service manual to prepare the
engine for service.
2. Put fresh, clean fuel in the fuel tank.
3. Begin the maintenance schedule.
4. Charge and install the battery.
STORAGE
WARNING: AVOID INJURY. Read and understand
entire Safety section before proceeding.