Gravely 992042 19HP-144Z, 992043 21HP-148Z, 992024 23HP-152Z, 992051 23HP-160Z, 992054 25HP-152Z, 992055 25HP-160Z, 992310 19HP-144Z, 992311 21HP-148Z Lawn Mower User Manual


 
GB - 25
SPECIFICATIONS
Model Number 992042 992043 992044 992051 992054 992055 992310 992311
Model 144Z 148Z 152Z 160Z 152Z 160Z 144Z 148Z
Length cm (in) 184.2 (72.5) 190.5 (75.0) 186.7 (73.5) 191.5 (75.4) 186.7 (73.5)
Height cm (in) 106 (42)
Width cm (in) 145 (57) 155 (61) 165 (65) 185 (73) 165 (65) 185 (73) 145 (57) 155 (61)
Weight Actual kg (lbs) 430 (946) 432 (951) 437 (961) 472.7 (1040) 437 (961) 472.7 (1040) 430 (946) 432 (951)
Battery 12 volt
Brakes Hydro/Dynamic Disk Parking
Turning Radius 0
Tire SizeFront
Rear
15 x 6 - 6
23 x 9.5 - 12
15 x 6 - 6
23 x 10.5 - 12
15 x 6 - 6
23 x 9.5 - 12
15 x 6 - 6
23 x 10.5 - 12
Engine manufacturer Kawasaki Kohler Kawasaki
Model Number FH601V FH641V FH680V CV730 FH601V FH641V
Cycle 4
Engine Power HP (kW)
@ Governed RPM
19 (14.1) 21 (15.7) 23 (17.1) 25 (18.7) 18 (13.4) 20.5 (15.3)
Max. Governed RPM
(No Load)
3600 3550 3600 2800 3300
Idle RPM 1800
Starting System Electric
Fuel Tank Capacity 10 gals. US (37.8 liters)
Fuel See Engine Manual
Air Cleaner Heavy Duty Dual Element with Pre-Clean Screen
Cooling Capacity Air Cooled
Engine oil type See Engine Manual
Spark Plug Gap See Engine Manual
Transmission Hydrostatic Drive
Speed Forward Max.
Reverse Max.
10 MPH (16 KM/H)
4.5 MPH (7.2 KM/H)
Transmission Lube Mobil 1 15W-50 Synthetic
Drive Clutch Hydrostatic
Tire PressureFront
Rear
20-25 psi
12-15 psi
Lift System Hydraulic
Power Take Off Electric PTO Clutch/Brake
Cutting Width cm (in) 112 (44) 122 (48) 132 (52) 152 (60) 132 (52) 152 (60) 112 (44) 122 (48)
Cutting Height cm (in) 2.5 - 12.7 (1 - 5)
Cut Increments cm (in) Innite between 2.5 - 12.7 (1 - 5)
CE Sound and Vibration
Oper. Ear Sound Pressure
(L
pa
) in dB
A
NA 90 92
Vibration Measure (m/sec
2
)
At Operator Hands: X axis
Y axis
Z axis
NA
1.4
0.5
0.6
0.93
0.39
1.55
At Operator Feet: X axis
Y axis
Z axis
NA
0.2
0.2
0.7
0.29
0.23
0.92
At Operator Seat: X axis
Y axis
Z axis
NA
0.3
0.3
0.7
0.35
0.38
0.74