Filter
Top Products
Trigger
Safety
Latch
WARNING
To
reduce the risk of serious bodily injury,
including
fluid
injection, splashing
in
the eyes or
on the skin,
ALWAYS
engage the trigger safely
latch whenever spraying stops, even for a
moment.
in the engaged position, the trigger safety latch
prevents the gun from being triggered
accidentally by hand or if it is dropped or
bumped.
Be
sure
the
latch is pushed fully down
when engaging it
or
it cannot prevent the gun
from being triggered. See Figure
2.
TRIGGER SAFETY LATCH
SHOWN
ENGAGED
TRIGGER SAFETY LATCH SHOWN DISENGAGED
Figure
2
Installing
and
Changing Spray Tips
WARNING
To
reduce the risk of serious bodily injury,
including fluid injection or splashing
in
the eyes
or
onto
the skin,
use
extreme caution when
changing spray tips.
ALWAYS
follow the
procedure below.
1.
Follow the Pressure Relief Procedure.
2.
Point the gun and wand away from yourself and
anyone
else.
3.
Without holding your hand
Over
the spray tip
(A),
pull back the quick coupler ring
(B),
remove the tip
and then release the ring. See Figure
3.
4.
Be sure the tip is secure before starting
to
spray
again.
5.
Tip holding holes are provided on
the
chassis
To
avoid blowing the O-ring out of the quick
coupler, due
to
the high pressure in the system,
never operate the pressure washer without a tip
securely mounted in the quick coupler.
Flgure
3
308-533
7