Filter
Top Products
GROUNDING INSTRUCTIONS
mis Droduct must be grounded. If it should malfunction
1-
DANGER
or
bieak
down,
grounding provides a path
of
least
resistance
for
electric current
to
reduce the risk
of
electric shock. This equipment is equipped with a cord
grounding plug. The plug must be plugged into an
having an equipment-grounding conductor and a
aooromiate outlet that is DroDerlv installed and
improper connection
of
the equipment- grounding
conductor can result In the risk
of
electrocution.
Check with a qualified electrician or service
person
if
you are in doubt as to whether the outlet
Is
properly grounded.
giunded in accordance
with
ail lbcal codes and
ordinances.
GROUND FAULT CIRCUIT INTERRUPTER PROTECTION
To
comply with the National Electrical Code (NFPA
70)
and
to
provide additional protection from the risk of
electric shock, connect this pressure washer
to
a circuit
that
is
protected by a ground-fauit circuit-intempter
(GFCI).
EQUIPMENT MISUSE HAZARD
General Safety
Any misuse of the pressure washer or accessories,
such as overpressurizing, modifying parts, using
damaged parts, can cause them
to
rupture and resun in
incompatible chemicals and fluids, or using wom or
fluid injection, splashing in the eyes
or
on the skin, or
other serious bodily injury, fire, explosion or property
damage.
NEVER
alter
or modify any part of this equipment; doing
so
could cause
it
to
malfunction.
CHECK
ail spray equipment regularly and repair or
replace wom or damaged parts immediately.
ALWAYS
wear protective eyewear and appropriate
the chemical manufacturer’s literature for
clothing.
If
using a chemical injector, read and follow
recommendations on additional protective equipment,
such
as
a respirator,
System Pressure
This
sprayer can develop high operating pressure. Be
to
withstand the maximum working pressure of this
sure that all spray equipment and accessories are rated
sprayer.
DO
NOT
exceed the maximum working
system.
pressure of any component or accessory used in the
..
Chemical Compatibility
BE
SURE
that ail chemicals used in the chemical
injector are compatible with the wetted parts of the
hose, gun, wand and tip, as given
in the Technical Data
(inside back cover). Always read the chemical
manufacturer’s literature before using any chemical in
this pressure washer.
308-533
3