Global Machinery Company ULB2400 Blower User Manual


 
9
Extension cord support
During use of the blower vac, the extension cord will
continually be pulled as you move from one area to another.
An extension cord support has been provided on the
housing of the blower vac to assist in preventing the
electrical connection between the extension cord and
blower vac plug being forced apart.
Note. The support is for the extension cord, and not the
cable from the blower vac.
1. To fit the extension cord to the support, make a tight
loop in the extension cord, approximately 300mm from
the socket on the extension cord.
2. Fit the loop into the
square recess in the back
portion of the blower vac
on the underside of the
housing (fig A).
3. Push the loop all the way
through the housing by
approximately 25mm.
4. Push each side of the loop
downwards so each side of
the loop fits over the hook
inside the recess (fig B).
5. After, and only after the
cable is correctly seated,
plug the blower vac plug
into the socket of the
extension cable.
Operation of the blower vac
Prior to using the blower vac, ensure you have read and
understood this instruction manual.
Ensure you are wearing suitable clothing and also safety
equipment like safety glasses, ear protection and a mask
if necessary.
Ensure the attachments to the blower vac are correctly
fitted and adjusted.
Be aware of other people and animals in the area where
you are to be operating the blower vac.
To turn the blower vac on
1. Plug the power cord into an approved electrical
extension cord, and turn the extension cord on.
2. Ensuring the blower vac is
directed in a safe direction,
push the lock-off switch
forward and depress the
trigger switch, the blower
vac will start (fig A).
While holding the trigger
switch the blower vac will
continue to operate without
the need to hold the lock-off
switch.
To turn the blower vac off
To turn the blower vac “off”, simply release the trigger switch.
Important. After you have turned the blower vac off, do
not leave the product until the blower vac has been fully
disconnected from the electrical supply.
A
A
B