Global Machinery Company ULB2400 Blower User Manual


 
11
The blower vac is not a garbage disposal unit. Do not
attempt to mulch any material than general garden
debris.
For better performance and comfort, it is recommended
the collection bag is emptied when it becomes
approximately half full. This reduces the weight and also
allows the vac operation to perform at its highest level.
Maintenance and storage information
Prior to cleaning or any maintenance, always ensure the
power plug has been removed from the electrical power
supply.
When you have finished using the blower vac, always
check to make sure the product is clean and free of dirt
and debris. This is important around the selector lever flap
which is just inside the round outlet. To check this area,
remove the collection bag and ensure this area inside the
outlet tube is free of debris and dirt.
Operate the selector lever backwards and forwards to
ensure correct operation.
Do not hose or submerge any part of the blower vac.
Do not use solvents to clean the blower vac.
Store the blower vac in a dry place, and out of reach of
children.
Power cord maintenance
If the supply cord needs replacing, the task must be
carried out by the manufacturer, the manufacturer’s
agent, or an authorised service centre in order to avoid
a safety hazard.