Filter
Top Products
Dear Customer
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Introduction
Your new GMC laser hand measuring tool will more than
satisfy your expectations. It has been manufactured
under stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
Caution. Carefully read through this entire Instruction
Manual before using your new GMC laser hand tool. Take
special care to heed the Cautions and Warnings.
Your GMC laser hand tool has many features that will
make your job faster and easier. Safety, performance,
and dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe
way.
Dear Customer
If you require any help with your product, whether it is a Warranty
claim, spare part or user information, please phone our Help Line for
an immediate response. Phone 1300 880 001 in Australia or
0800 445 721 in New Zealand.
Introduction
Your new GMC laser hand tool will more than satisfy your expectations.
It has been manufactured under stringent GMC Quality Standards to
meet superior performance criteria.
You will nd your new tool easy and safe to operate, and, with proper
care, it will give you many years of dependable service.
Caution. Carefully read through this entire Instruction Manual before
using your new GMC laser hand tool. Take special care to heed the
Cautions and Warnings.
Your GMC laser hand tool has many features that will make your job
faster and easier. Safety, performance, and dependability have been
given top priority in the development of this tool, making it easy to
maintain and operate.
Environmental protection
Recycle unwanted materials instead of disposing of them
as waste. All tools, hoses and packaging should be sorted,
taken to the local recycling centre and disposed of in an
environmentally safe way.
Description of symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Conforms to relevant standards for
electromagnetic compatibility.
Do not stare into beam. Only turn laser beam on when tool is on
work piece. Class 2 laser product.
Specications
Recommended Use: Indoor
Length of laser line: Up to 10m
Laser diode type: Red laser diode 635 - 650nm
Laser class: Class 2, maximum power output less than or equal to 1mW
Operation area: Up to 10m distance
Laser fan beam angle: 100°
Self-leveling range: +/- 3°
Leveling time: <5 second
Vertical line accuracy (end to end): +/-3.1mm at 4.8 metres
Line width accuracy: <3.1mm at 4.8 metres
Power supply: 2 x AA 1.5 volt batteries (not supplied)
Battery life: 40 hours typical of continuous use with alkaline batteries
Operation temperature: -1°C to 40°C
CAUTION. Laser radiation is emitted from the line generator.
54