Filter
Top Products
Part No. 35566 Genie Lift 9
Operator's ManualFirst Edition • Sixth Printing
Pre-operation Inspection
o Be sure that the operator’s manual is complete,
legible and available for reference.
o Be sure that all decals are legible and in place.
See Decals section.
Check the following components or areas for
damage, improperly installed or missing parts and
unauthorized modifications:
o Winch and related components
o Base components
o Legs
o Roller wheels
o Inner and outer frames
o Glide buttons
o Carriage hold-down assembly
o Cable anchor
o Cable and pulleys
o Wheels and casters
o Forks
o Load platform and boom (if equipped)
o Nuts, bolts and other fasteners
o Cable (kinks, frays, abrasions)
o Ladder (if equipped)
o Brake system (if equipped)
o Limit switch (electric winch models)
o Electric winch and related components
(if equipped)
o Hand controls and wiring (electric winch
models)
PRE-OPERATION INSPECTION
Check the entire machine for:
o Dents or damage
o Corrosion or oxidation
o Cracks in welds or structural components
o Be sure that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened.
o Inspect and clean the battery terminals and all
battery cable connections.
o Be sure there is a minimum of 4 wraps of cable
around the winch drum when the carriage is
fully lowered.
o Be sure the frame channels are properly
lubricated and free of debris. Lubricate the
channels with a dry silicone spray or silicone
wax (Genie part number 90337).