Filter
Top Products
25
• Line the compartment door interior (except for air
openings) with suitable, fireproof sound insulation
(such as 1-inch (25 mm) thick fiberglass with a 2-
pound density).
Figure 2.7 – Typical Noise Abatement
2.2.5 COMPARTMENT FLOOR CUTOUTS
Provide openings in the generator compartment for
the following items (Figure 1.2):
• Engine exhaust and cooling air outlets
• Generator cooling air inlet
• Four holes for passage of generator mounting
bolts. See Section 2.1.4.
DANGER
Fuel lines and exhaust piping must not pen-
etrate into the vehicle living area.
Section 2 – Installation
Recreational Vehicle Generator
Figure 2.8 – Compartment Floor Cutout (Drawing 0D8716-G)
REF.
R
E
HOT AIR
EXHAUST
TAIL PIPE
EXIT
OIL DRAIN
AIR
INTAKE
48.1
[ 1 7/8"]
222.7
[ 8 3/4"]
300.7
[ 11 13/16"]
369.7
[ 14 9/16"]
688.3
[ 27 1/8"]
29
[ 1 1/8"]
55.5
[ 2 3/16"]
376.5
[ 14 13/16"]
5/16"-18 WELDNUTS
(6 PLACES)
82.5
[ 3 1/4"]
343.4
[ 13 1/2"]
423.2
[ 16 11/16"]
717.7
[ 28 1/4"]
50.8
[2"]
118
[ 4 5/8"]
223.5
[ 8 13/16"]
60
[ 2 3/8"]
210
[ 8 1/4"]
176.6
[ 6 15/16"]
83.5
[ 3 5/16"]
429.5
[ 16 15/16"]
414.5
[ 16 5/16"]
360.5
[ 14 3/16"]
63.5
[ 2 1/2"]
416
[ 16 3/8"]
170
[ 6 11/16"]
79
[ 3 1/8"]
101
[ 4"]
TYP.
6.7
[ 1/4"]
736.4
[ 29"]
476.4
[ 18 3/4"]
36.5 [ 1 7/16"]
VIEW FROM TOP
NOTE: ALL AIR
KEPT CLE
A
IS REQUIR
E
All measurements are in millimeters, 25.4 mm = 1”.