Filter
Top Products
Generac Portable Products 3,000 PSI High Pressure Washer
5
WARNING! Read entire owner’s manual before
you attempt to assemble or operate your new
pressure washer.
REMOVE PRESSURE
WASHER FROM
CARTON
• Remove the high pressure hose and parts box included
with pressure washer.
• Slice two corners at the end of carton from top to
bottom so the panel can be folded down flat, then
remove all packing material.
• Roll pressure washer out of carton.
CARTON CONTENTS
Items in the carton include:
• Main Unit
• High Pressure Hose
• Handle Assembly
• Parts Box, includes:
• (2) 20oz oil bottles
• Safety goggles
• Nozzle cleaning kit
• Bag Containing 5 multi–colored nozzles
• O–Ring maintenance kit
• Owner’s manual
• Engine manual
• Engine warranty
• Emissions control system warranty
• Spray gun
• Nozzle extension with quick–connect fitting.
• Parts Bag (containing hardware to attach handle to
pressure washer)
• 4 Carriage Bolts
• 4 Flange Nuts
If any of the above parts are missing or damaged, call the
pressure washer helpline at 1–800–270–1408.
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, call the
pressure washer helpline at 1-800-270-1408.
To prepare your pressure washer for operation, you
will need to perform these tasks:
• Fill out and send in the registration card for a valid
warranty.
• Attach the handle to the main unit.
• Add oil to the engine.
• Add fuel to the fuel tank.
• Connect high pressure hose to spray gun and pump.
• Connect the water supply to the pump.
• Connect nozzle extension to gun.
• Select and install desired nozzle.
Attach Handle to the Pressure
Washer
Use either a 13mm wrench or adjustable wrench to attach
the handle to the pressure washer.
To attach handle to the pressure washer:
• Slowly tip the pressure washer forward and let it gently
rest on the front bumper.
• Align the holes on the handle with the holes on the base.
• Insert the carriage bolts provided to hold the handle in
place (Figure 1).
Figure 1 — Attach Handle to Pressure Washer