Filter
Top Products
Generac Portable Products 3,000 PSI High Pressure Washer
4
KNOW YOUR PRESSURE WASHER
Read this owner’s manual and safety rules before operating your high pressure washer.
Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Automatic Cool Down System — Cycles water through
pump when water reaches 140°-145°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Chemical Injection Siphon/Filter — Insert filter and hose
into chemical container.
Dual Element Air Filter — Filter limits the amount of dirt and
dust that gets in the engine.
Gas Tank — Fill tank with regular unleaded gasoline. Always
leave room for fuel expansion.
High Pressure Hose — Connect one end to the water pump
and the other end to the spray gun.
High Pressure Outlet With Quick-Connect Fitting —
Connection for high pressure hose.
Nozzle Extension With Quick–Connect Fitting — You
must attach this to the spray gun to use the nozzles. The
quick–connect fitting lets you quickly exchange the four provided
nozzles to adjust the spray pattern of the high pressure spray and
apply chemical.
Oil Fill Cap — Fill engine with oil here.
Pressure Control Knob — Varies the pressure of the high
pressure spray.
Pump — Develops high pressure.
Quick-Connect Nozzles - Chemical injection, 0°, 15°, 25°, 40°:
for various cleaning applications.
Recoil Starter — Use for starting the engine manually.
Spray Gun — Controls the application of water onto cleaning
surface with trigger device. Includes safety latch.
Water Inlet — Connect garden hose here.
Spray Gun
Nozzle Extension With
Quick-Connect Fitting
High Pressure Hose
Recoil Starter
Gas Tank
Water Inlet
Pressure Control Knob
Pump equipped with
Automatic Cool Down System
High Pressure Outlet With
Quick-Connect Fitting
Chemical Injection Siphon/Filter
Dual Element
Air Filter
Oil Fill Cap
Pump Inset View
Quick-Connect Nozzles