Filter
Top Products
9
CONTROL PANEL DESCRIPTIONS
Control Panel
1 Timing (Down)
Cycles backward through the list of timings.
2 Timing (Up)
Cycles forward through the list of timings.
3 Pattern (Down)
Cycles backward through the list of patterns.
4 Pattern (Up)
Cycles forward through the list of patterns.
5 Auto Indicator
This LED will glow bright green when the Signal Generator is placed in Auto
mode.
6 Auto
Automatically cycles through a specifi ed list of timing / pattern sets. The Autorun
Demonstration mode is confi gured through the HD Pattern Signal Generator
software. See page 72 for details.
7 EDID Pattern
Press this button to jump directly to the EDID Pattern (P38). See page 21 for
more information on using the EDID Pattern.
8 EDID Pattern Indicator
This LED will glow bright green when the Signal Generator is placed in EDID
mode.
9 Output Signal Button
Selects between PC / HD (VGA), DVI, or HDMI signal types. Consecutively
press this button to cycle through each of the signal types.
10 Output Signal Indicators
These LED indicators will glow bright green to indicate the current video output
mode (PC, HD, DVI, or HDMI).
11 Fav. Button
Confi gures the generator to show only the patterns selected using the HD
Pattern Signal Generator software (see page 51 for details). This button is also
used to change parameters when using certain patterns.
12 Fav. Indicator
This LED will glow bright green when the [Fav] button is pressed.
13 Option Button
The option button provides access to sub-functions within certain patterns.