Filter
Top Products
page | 16
The 1:2 Splitter for HDMI 4K x 2K should be mounted vertically in a wall or cabinet with
wood/drywall screws as shown in the diagram above. There should be an inch or two of
clearance between the edges of the unit and any walls or vertical surfaces to allow for
enough clearance for insertion and retraction of cables at the HDMI connectors.
For installation on a drywall surface, use a #6 drywall screw. It is recommended when
installing on a drywall surface that studs be used to secure the splitter should undue stress
be applied when connecting and disconnecting HDMI cables.
Appendix
Wall Mounting Instructions