Filter
Top Products
page | 11
Operating the 1:2 Splitter for HDMI 4K x 2K
Setting the Audio Channel Mode
Using Multichannel Audio
Use this audio mode when the connected displays (and/or other sink devices) are capable
of supporting various audio formats.
1. Disconnect the power supply from the splitter.
2. Set the EDID switch to the Int position.
3. Set the Audio switch to the Multi-ch position.
4. Reconnect the power supply.
If either the EDID or Audio switch are moved to another position while the splitter is
powered, then power-cycle the splitter by disconnecting and reconnecting the power
supply in order for the changes to take effect.
5. When the Audio switch is set to the Multi-ch position, the following audio output
formats are supported:
Audio Format Audio Format
LPCM 2CH LPCM 8-channel
Dolby® Digital Dolby® Digital Plus
Dolby® TrueHD DTS®
DTS-HD Master Audio™ MLP (PPCM)
Set to the
Multi-ch position