Filter
Top Products
17
GB
7
A
9
0
6
7
8
1. Depress both locking buttons
6
and remove the battery
7
from the battery holder
8
on the handle.
2. Plug the plug of the charger cable
9
into the battery
7
.
3. Plug battery charger
0
into a mains socket.
Charging indicator lamp
A
lights up red:
The battery is being charged.
Charging indicator lamp
A
lights up green:
The battery is fully charged.
(For charging time, see 10. Technical Data.)
4. First remove the charging cable
9
from the charging socket
and then unplug the battery charger
0
from the mains socket.
5. Put the battery
7
on the battery holder
8
on the handle.
Avoid exhaustive discharge:
Do not wait until the blade comes to an absolute stop (battery
totally discharged) as this shortens the battery life.
v If the output of the hedge trimmer decreases noticeably,
charge the battery.
If the battery has been totally discharged, the LED will flash at
the start of charging. If the LED is still flashing after an hour, a
fault has occurred (see 8. Troubleshooting).
5. Operation
The hedge trimmer can be operated in 4 working positions.
Working positions:
Side trimming:
Cutting unit
rotated by 90°
Vertical trimming
at high level:
Telescopic tube
extended
Horizontal
trimming at
high level:
Cutting head
tilted by 75°,
telescopic tube
extended
Trimming at low
level:
Cutting head
extended by
-45°, telescopic
tube extended