Filter
Top Products
16
GB
The charging cable should be checked regularly for
signs of damage or ageing (brittleness) and may only
be used if it is in perfect condition.
The charger unit provided may only be used to charge
the rechargeable batteries supplied with the Hedge
Trimmer.
Non-rechargeable batteries must not be charged with
this battery charger (danger of fire).
The Hedge Trimmer must not be operated during
charging.
After charging, disconnect the charger from the mains.
Only charge battery between 10 – 45 °C. After heavy
duty service allow battery to cool down first.
Storage:
The trimmer must not be stored over 35°C or under
direct exposure to sunlight.
Do not store the Hedge Trimmer in places with static
electricity.
Fitting the hand guard:
3
4
5
1
2
A
B
C
Charging the battery:
3. Assembly
Before the hand guard
5
can be
fitted, the position of the hedge
trimmer has to be changed – from
the packing position A to the
working position C.
A Hold down the button
1
and tilt
the swivel head
2
by 90°
(see 5. Operation
“Tilting the
swivel head”
).
B Hold down the button
3
and
rotate the cutting unit
4
to the
0° position (see 5. Operation
“Rotating the cutting unit by 90°”
).
C Hold down the button
1
and tilt
the swivel head
2
to 0°.
v Push the hand guard
5
onto the
swivel head
2
until the snap-on
fittings engage.
4. Initial Operation
WARNING !
A
Overvoltage damages batteries and the battery
charger.
V Ensure the correct mains voltage.
Before using for the first time, the battery must be fully charged.
Charging time (for uncharged battery) see 10. Technical Data.
The lithium-ion battery can be charged in any state of charge,
and the charging process can be interrupted at any time without
harming the battery (no memory effect).
In order that the fully charged battery does not self-discharge
via the charger, it should be disconnected from the charger after
charging.