Filter
Top Products
Maintenance
W
V
• WARNING
Disconnect from the mains electricity sup-
ply, before attempting any maintenance or
adjustment. Cutting head continues to
rotate after the trimmer has been switched
off. Keep fingers and hands clear of the
line cutter on leading edge of guard.
Caring for your Pr
oduct
1. Disconnect from the mains electricity supply.
2. Never clean your product with water, cleaning
fluids, or solvents, just remove debris with a
suitable tool, a soft brush or dry cloth.
3. Using a soft brush, clean around the inside of
the safety guard, the cutting head (Fig V) and
the motor housing air vents. (Fig W1)
4. Remove the cutting head. Using a soft brush,
remove any grass clippings from around the
cutting head shaft (X).
5. Inspect the product carefully, especially the
parts of the cutting head.
6. If your product is damaged in any way contact
your local approved service centre.
• Never use a damaged product.
7. Store in a cool, dry place and out of reach of
children.
Cable Storage
1. Your mains cable can be stored on the product
as illustrated in Fig Y.
2. Wind cable carefully to avoid kinking.
3. To release the cable press the button and the
hook will drop down (Z).
4. Push cable hook fully back into position.
Z
Y
1
X