Filter
Top Products
Fails to Operate
1. Is the correct Starting procedure being followed?
See ‘To Start your Lawnmower’.
2. Is the grassbox lid firmly closed?
3. Is the Power Turned On?
4. Check the fuse in the plug, if blown replace.
5. Fuse continues to blow?
Immediately disconnect from the mains elec-
tricity supply and consult your local approved
Electrolux Outdoor Products Service Centre.
Poor Grass Collection
1. Disconnect from the mains electricity supply.
2. Check that the grass chute and the underside of
the deck are free from grass.
3. Raise to a higher height of cut. See Cutting
Height Adjustment.
4. Clean Fan Blades.
5. If poor collection persists.
Immediately disconnect from the mains elec-
tricity supply and consult your local approved
Electrolux Outdoor Products Service Centre.
Lawnmower becomes heavy to push
1. Disconnect from the mains electricity supply.
2. In long grass or uneven ground, the height of cut
should be raised to a higher position. See Cutting
Height Adjustment
3. Check that the wheels and roller can rotate freely.
4. If problem persists?
Immediately disconnect from the mains elec-
tricity supply and consult your local approved
Electrolux Outdoor Products Service Centre.
Excessive Vibration
1. Disconnect from the mains electricity supply.
2. Check that the blade is fitted correctly?
3. If the blade is damaged or worn, replace it with a
new one.
4. If vibration persists, turn the blade through 180
o
by first loosening the blade bolt, turning the blade
and re-tightening the blade bolt.
5. If vibration persists?
Immediately disconnect from the mains elec-
tricity supply and consult your local approved
Electrolux Outdoor Products Service Centre.
Fault Finding Hints