Filter
Top Products
A
C
Assembly of Lower Handles to Deck
1. Insert lower handle into holes in the deck (A).
2. Release the grassbox catch and lift the grassbox
lid (B).
3. Rest the grassbox lid against the lower handle
and remove the grassbox.
4. Push the lower handle into place ensuring that the
holes in the lower handle are correctly located
behind the holes in the deck.
5. Secure the lower handles to the inside of the deck
with the lower handle fixing pins (C).
6. Ensure the fixing pins are securely located.
7. Should a problem occur when securing lower
handle to deck, carefully lever fixing pins out of
location and repeat steps 4 to 6 above.
8. Replace the grassbox and close the grassbox lid.
Assembly of Upper Handles to Lower Handles.
• Ensure the upper handle is located correctly with the
lock-off button on the switchbox uppermost
1. Insert the nut into the handle knob (D1).
2. Ensure the upper handle and the lower handle
are aligned correctly. (D2)
3. Fit the bolts, washers and handle knobs.(D)
4. Fit the cable to the handles with the clips provid-
ed. Make sure the cable is not trapped between
the upper and lower handles.
Assembly Instructions
B
lower
handle
fixing
pins
grassbox lid
D
handle
knob
washer
Adjusting the cutting height
1. Lift the lever out of location and rotate to the
desired position. (E)
Heights of cut:-
1 & 2 - low, 3 - medium, 4 & 5 - high
Cutting Height Adjustment
E
1
2
bolt