Filter
Top Products
Removing and Fitting the Blade and Fan (Q)
Q
blade
blade bolt
fan
pulley
Always handle the blade with care - sharp edges
could cause injury. USE GLOVES.
Removing the Blade and Fan
1. To remove the blade bolt, hold the fan firmly and,
with the spanner provided, loosen the blade bolt
by turning it anti-clockwise.
2. Remove the blade bolt, blade and fan from the
pulley.
3. Inspect for damage and clean as necessary.
Renew your metal blade after 50 hours mowing or
2 years whichever is the sooner - regardless of
condition. If the blade is cracked or damaged
replace it with a new one.
Fitting the Blade and Fan
1. Ensure the fan is located correctly.
2. Fit the blade to the fan.
3 Re-assemble blade bolt through blade and fan.
4. Hold the fan and tighten blade bolt firmly with the
spanner provided. Do not over tighten.
R1 R2
R3 R4
Storing your cable in the Easi-Reel cable winder
1. Insert the femaleconnector into the top of the
cable winder (R1)
2. Place the cable under the cable guide (R2)
3. Turn the cable winder (R3) until all of the cable is
wound in.(R4)
Unwinding the cable before re-use
1. Pull the cable by the plug and unwind the cable
fully.
• Ensure that the cable is released from the
cable guide (R2) before using your machine.
Easi-Reel Cable Winder (Roller Compact 4000 only)