Maintenance
X
W
• WARNING
Disconnect from the mains electricity sup-
ply, before attempting any maintenance or
adjustment. Cutting head continues to
rotate after the trimmer has been
switched off. Keep fingers and hands
clear of the line cutter on leading edge of
guard.
Caring for your Pr
oduct
1. Disconnect from the mains electricity supply.
2. Never clean your product with water, cleaning
fluids, or solvents, just remove debris with a
suitable tool, a soft brush or dry cloth.
3. Using a soft brush, clean around the inside of
the safety guard, the cutting head (W) and the
motor housing air vents. (X1)
4. Remove the cutting head. Using a soft brush,
remove any grass clippings from around the
cutting head shaft (Y).
5. Inspect the product carefully, especially the
parts of the cutting head.
6. If your product is damaged in any way con-
tact your local approved service centre.
• Never use a damaged product.
7. Store in a cool, dry place and out of reach of
children.
Cable Storage
1. Your mains cable can be stored on the prod-
uct as illustrated in Fig Z1.
2. Wind cable carefully to avoid kinking.
3. To release the cable press the button and the
hook will drop down (Z2).
4. Push cable hook fully back into position.
Hexagon Drive T
ool Storage
1. Your Hexagon Drive Tool can be stored in the
Handle Clamp as illustrated in Fig Z3.
Z2
Z1
Z3
1
Y