Filter
Top Products
You can adjust the seat to two different positions:
Recline or Upright.
• From behind the seat, press both seat position buttons.
• Push the seatback up until the buttons “snap” into the
upright position.
• Push the seatback down until the buttons “snap” into the
recline position.
Front Edge
of Seat
Press Seat Position Buttons
You can adjust the motion of the swing: side to side or
front to back.
• Press the seat tube button to unlock the seat tube.
• Rotate the seat tube to the desired position.
Seat Tube Button
Seat Tube
PRESS
TURN
Upright
Recline
Storage
• Press the buttons on the back of the motorized frame while
pushing the legs inward.
• Lean the swing frame against a wall for storage.
IMPORTANT! Remove the batteries for long-term storage.
Button
Button
Lower Leg
Button
Lower Leg
Button
Hint: The legs may be disassembled for long-term storage. Press the
button on each lower leg and remove them from the upper legs.
Using the Tray
• Fit the tabs on the tray into the slots in the sides of the seat.
• To remove the tray, pull one edge of the tray out and lift.
Tray
Slot
Set Up
10
4
6
5
7
Cradle Swing