Filter
Top Products
7
Assembly
• Position the seat back tube so that it curves toward the back
of the swing.
• While pressing the buttons on the seat back tube, fit the
seat back tube into the short tubes on the swing arms.
• Push the seat back tube until it“clicks” into place.
• Pull up on the seat back tube to be sure it is secure to the
swing arms.
Seat Back Tube
Buttons
Swing Arm Short Tubes
7
8
• Insert two #6 x1.9 cm screws through the upper swing arm
and into the lower swing arm. Tighten the screws.
Shown Actual Size
#6 x 1.9 cm Screws - 4