Filter
Top Products
4
Assembly
• Rotate the upper frame tube until it "snaps" into an upright
position, as shown.
IMPORTANT! Before assembly, inspect this product for
damaged hardware, loose joints, missing parts or sharp
edges. DO NOT use if any parts are missing or broken.
Contact Mattel for replacement parts and instructions
if needed. Never substitute parts.
• Position the front tube so that the rubber feet are flat on
the surface.
• While pressing the button on the lower frame tube, insert it
into an end of the front tube. Continue to insert the lower
frame tube into the front tube until you hear a "click".
• While pressing the button on the front tube, insert it into
the end of the lower frame tube. Continue to insert the
front tube into the lower frame tube until you hear
a "click".
Upper Frame Tube
Press Button
on Front Tube
Press Button on
Lower Frame Tube
Rubber Feet Down
1 2