Fiat T8.33O Lawn Mower User Manual


 
FLOW CONTROL
USING THE INTELLIVIEW III
The IntelliView™ III touchscreen makes
setting flow rates to individual valves simple.
Scroll through the menus and select valve
control. Choose the outlet you wish to adjust,
and drag the slider with your finger to the
desired setting. Job done.
MEGAFLOW™ PUMP
Standard hydraulic flow is a
generous 161 litres per minute.
For extremely high flow requirements
an additional MegaFlow pump
delivers a total flow of 274 litres
per minute. With Engine Power
Management, full hydraulic capacity
can be exploited in demand
conditions, with up to 49hp(CV)
of extra power available.
UP TO 6 ELECTRONIC REMOTES
The remote valves fitted to T8 tractors
are easily identified and related to their
in-cab control. The operator can access
all six without having to move away
from the SideWinder™ II armrest. Four
colour-coded paddles and a centrally
positioned joystick make it simpler to
identify and work each remote with
exact precision. The CommandGrip will
also give access to two valves. Flow,
timing and detent settings can be set to
precisely match the job. Each valve can
also be programmed into the Headland
Sequencing system.