Filter
Top Products
21
Troubleshooting, Adjustment & Service
MOWING HEIGHT ADJUSTMENT
The mowing height is determined by three factors: the
mount position of the mower deck, the number of blade
spacers above the spindle and the number of caster
spacers above the caster arm.
Refer to the
Height Of Cut
chart to the right for the cor-
rect settings to obtain the desired height of cut.
Remember, the “Blade Spacers” and “Caster Spacers”
columns refer to the number ABOVE the spindle and
caster arm. See Figure 16.
Mount Blade Caster
Height Of Cut Position Spacers Spacers
(C, Fig. 16) (B, Fig. 16) (A, Fig. 16)
1-3/4” U13
2” U23
2-1/4” U33
2-1/2” U32
2-3/4” L42
3” L21
3-1/4” L31
3-1/2” L30
3-3/4” L40
4” L50
Figure 16. Mowing Height Adjustment Points
A. Caster Spacers
B. Blade Spacers
C. Deck Mount Position (shown in “L”)
C
B
A
B
A