Filter
Top Products
31
Troubleshooting, Adjustment & Service
MOWING HEIGHT ADJUSTMENT
See Deck Lift Rod Timing Adjustment and Deck Leveling
Adjustment sections to ensure that the actual cutting
height is consistent with the cutting height adjustment
pin placement.
The cutting height adjustment pin (A, Figure 38) controls
the mower cutting height. The cutting height is
adjustable between 1-1/2” (3,8cm) and 5” (12,7cm) in
1/4” (0,64cm) increments.
Depress the deck lift foot pedal (B), placing the majority
of the force on the top edge of the pedal until it locks
into the “TRANSPORT” position.
Place the cutting height adjustment pin in the desired
cutting height. Depress the deck lift foot pedal, placing
the majority of the force on the bottom edge of the pedal
to release the pedal from the “TRANSPORT” position.
A
B
C
Figure 38. Mowing Height Adjustment
A. Cutting Height Adjustment Pin
B. Deck Lift Foot Pedal
C. Cutting Height Selection Decal