Filter
Top Products
- 10 -
3.3 Installing the Fuel Tank and the Fuel Line (Units with Kawasaki Engines Only)
1. Start the two self-tapping screws into the bottom of the fuel tank and then remove
the screws (Fig. 3).
2. Hook the plastic clips on the front of the fuel tank onto the fuel tank bracket (Fig. 3).
3. Secure the fuel tank to the tank base with the two self-tapping screws (Fig. 3). Do
not overtighten the screws.
4. Remove the red cap from the end of the fuel line and from the end of the elbow
fitting on the fuel tank (Fig. 4).
5. Slide the end of the fuel line onto the elbow fitting (Fig. 4).
6. Secure the fuel line in place with the fuel line clamp (Fig. 4).
3.4 Installing the Discharge Tunnel Plug
1. Open the discharge door by pulling forward on the handle and moving it rearward
(Fig. 5). Hold the discharge door handle to prevent the spring-loaded door from
closing while you insert the plug.
.
Tank Base
Fuel Tank
Bracket
Fuel Tank
Plastic Clips
Self Tapping
Screw
Figure 3
Figure 4
Fuel Line
Fuel Valve
Elbow Fitting
Figure 5
Discharge Door Handle
Plug rotated clockwise