Exmark M216KA, M216KASP Lawn Mower User Manual


 
4
before clearing blockages or unclogging the chute;
before checking, cleaning, or working on the lawn
mower;
after striking a foreign object. Inspect the lawn
mower for damage and make repairs before starting
and operating the lawn mower; and
if the lawn mower starts to vibrate abnormally
(check it immediately).
Stop the engine:
whenever you leave the lawn mower; and
before refuelling.
Reduce the throttle setting during engine run-out and,
if the engine has a shutoff valve, turn the fuel off after
mowing.
Stop the blade(s) when crossing gravel drives, walks,
or roads.
Shut the engine off and wait until the blade comes to a
complete stop before removing the grass catcher.
Do not operate the lawn mower while under the
influence of alcohol or drugs.
If the lawn mower should start to vibrate abnormally,
stop the engine and check immediately for the cause.
Vibration is generally a warning of trouble.
Slopes are a major factor related to slip and fall accidents
which can result in a severe injury. If you feel uneasy on a
slope, do not mow it.
Watch for holes, ruts, or bumps. Tall grass can hide
obstacles.
Do not mow near drop-offs, ditches, or embankments.
You could lose your footing or balance.
Do not mow on wet grass. Reduced footing could
cause slipping.
Maintenance and Storage
Keep all nuts, bolts (especially blade attachment
bolts), and screws tight to ensure that the lawn mower
is in safe working condition.
Never store the lawn mower with gasoline in the tank
inside a building where fumes may reach an open
flame or spark.
Allow the engine to cool before storing the lawn
mower in any enclosure.
To reduce the fire hazard, keep the engine, muffler,
battery compartment, and gasoline storage area free of
grass, leaves, or excessive grease.
Check the grass catcher frequently for wear or
deterioration.
Replace worn or damaged parts.
Use extra care when handling gasoline; gasoline
vapors are explosive.
Never tamper with safety devices. Check their proper
operation regularly.
Keep the lawn mower free of grass, leaves, or other
debris buildup. Clean up any oil or fuel spills.
Stop and inspect the lawn mower if you strike an
object. Repair the lawn mower, if necessary, before
starting the engine.
Never attempt to make wheel height adjustments while
the engine is running.
Grass catcher components are subject to wear, damage,
and deterioration, which could expose moving parts or
allow objects to be thrown. Frequently check the
components and replace them with the manufacturer’s
recommended parts when necessary.
Lawn mower blades are sharp and can cut. Wrap the
blade(s) or wear gloves, and use extra caution when
servicing them.
Do not change the speed settings on the engine.
If you must drain the fuel from the fuel tank, do it
outdoors.
To ensure the best performance and safety, purchase
only genuine Exmark replacement parts and
accessories.
Maintain or replace safety and instruction decals when
necessary.
Exmark Lawn Mower Safety
The following list contains safety information specific to
Exmark products or other safety information that you
must know that is not included in the ANSI/OPEI
standard.
This product is designed for cutting and recycling grass or,
when equipped with a grass bagger, for catching cut grass.
Any use for purposes other than these could prove
dangerous to the user and bystanders.
Note: This engine is not equipped with a spark arrester
muffler. It is a violation of California Public Resource
Code Section 4442 to use or operate this engine on any
forest-, brush-, or grass-covered land. Other states or
federal areas may have similar laws.
General Operation
Ensure that the area is clear of other people before
mowing. Stop the lawn mower if anyone enters the
area.