Filter
Top Products
8- ENG
A12338
Quick
Connect
Spray Wand
Surface
Cleaning
Guide
OPERATING INSTRUCTIONS
Compare the illustrations with your unit to familiarize yourself with the location of
various controls and adjustments. Save this manual for future reference.
Engine
High
Pressure
Hose
Spray
Gun
Chemical
Hose
High
Pressure
Pump
BASIC ELEMENTS OF A
PRESSURE WASHER
High Pressure Pump: Increases the
pressure of the water supply.
Engine: Drives the high pressure
pump.
High Pressure Hose: Carries the
pressurized water from the pump to
the gun and spray wand.
Spray Gun: Connects with spray wand
to control water flow rate, direction,
and pressure.
Quick Connect Spray Wand: Allows
the user to quickly change out high-
pressure nozzles. See How To Use
Spray Wand instructions in this section.
Chemical Hose: Feeds cleaning
agents into the pump to mix with the
water. See How To Apply
Chemicals/Cleaning Solvents
instructions in this section.
"Water Vroom" surface cleaning
guide: Allows the operator to maintain
a consistent distance when cleaning
most any flat surface.
BASIC ELEMENTS OF AN
ENGINE
Refer to the engine manual for location
and operation of engine controls.
Choke Control: Opens and closes
carburetor choke valve
Engine Switch: Enables and disables
ignition system.
Starter Grip: Pulling starter grip
operates recoil starter to crank engine.