Filter
Top Products
Chemical
Hose
6- ENG
A12338
"Water Vroom"
Surface Cleaning Guide
English/
Spanish
Operation
Manual
ASSEMBLY INSTRUCTIONS
4. Attach high
pressure hose to
gun. Tighten
securely.
1. Place the nozzle holder onto the
panel (located on the handle
assembly) and push each nozzle
holder into place.
2. Remove five colored quick connect
nozzles from plastic bag and insert
them into correct grommet on the
nozzle holder. NOTE: Nozzles are
color coded to match colored
nozzles on panel.
3. Place handle assembly onto frame,
depress the snap buttons, and slide
the handle assembly onto the frame
until snap buttons snap into place.
CARTON CONTENTS
Bagged Parts
Nozzle
Cleaning
Tool
Engine Frame
and Wheel
Assembly
High Pressure
Hose
Spray Gun
Quick Connect Spray Wand
Engine
Manual
Handle
Quick
Connect
Nozzles
Nozzle
Holder
5. To Assemble "Water Vroom"
surface cleaning guide. NOTE: If
not using the "Water Vroom"
surface cleaning guide proceed to
step 6.
a. Loosen knob
(a) and rotate
"J" hook (b)
down and out
of the way.
b.Slide spray
wand (c)
through
opening in
surface
cleaning
guide.
IMPORTANT: Make
sure nozzle is removed before
assembling surface cleaning guide.
c. Adjust spray wand to desired
height needed for job to be
performed.
a
b
c