EMAK MT4000 Chainsaw User Manual


 
5
en
SAFETY
- This symbol indicates Warning, and
Caution.
- Your manual contains special mes-
sages to bring attention to potential
safety concerns, machine damage
as well as helpful operating and
servicing information. PLEASE
READ ALL THE INFORMATION
CAREFULLY TO AVOID INJURY
AND MACHINE DAMAGE.
- Wear eye, hearing and head pro-
tection when operating this equip-
ment.
- Wear non-slip, heavy-duty protecti-
ve gloves when handling the chain
saw and saw chain.
- Wear safety strong shoes or boots
having skid-proof sole and anti-pier-
cing insert.
-
WARNING! Beware of Kickback.
Avoid bar nose contact.
- Always hold saw properly with both
hands.
- Measured maximum kickback value
without chain brake for the bar and
chain combination on the label.
ƽ
State and Local Requirements
Your saw is equipped with a temperature limiting muffler and a spark arresting screen in order to comply
with the requirements of SAE Recommended Practice J335 and California Codes 4442 and 4443. All
national forest land and land managed by the states of California, Maine, Washington, Idaho,
Minnesota, New Jersey and Oregon require internal combustion engines to be equipped with a
spark arrester screen by law. Other states and federal agencies are enacting similar regulations.
If you operate a chain saw in a state or locale where such regulations exist, you are legally responsible for
maintaining the operating condition of these parts. Failure to do so is a violation of a law. Spark arrester
maintenance is described in the Maintenance-Spark Arresting Muffler Section of the manual.
Note: When using a chainsaw for logging purposes, refer to Code of Federal Regulations, Parts
1910 and 1928.
WARNING: The ignition system of your unit produces an electromagnetic field of a very low
intensity. This field may interfere with some pacemakers. To reduce the risk of serious or
fatal injury, persons with pacemaker should consult their physician and the pacemaker
manufacturer before operating this tool.
WARNING: Muffler surfaces are very hot during and after operation of the chain saw, keep
all body parts away from the muffler. Serious burns may occur if contact is made with the
muffler.
ƽ
ƽ
Understanding Safety Labels