Filter
Top Products
18
OPERATION
STARTING
COLD ENGINE
WARNING DANGER
The cutting attachment should not rotate at idle. If attachment
rotates, readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your ECHO Dealer, otherwise
serious personal injury may result.
NOTE
Refer to the attachment Operator's Manual and Safety Manual (if
included) for proper and safe operating techniques.
All Models
1. Stop Switch
Move stop switch button (A) forward away from the STOP position.
2. Choke
Move choke (B) to “Cold Start” Position.
3. Primer
Pump primer bulb (C) until fuel is visible and flows freely in the clear
fuel tank return line. Pump bulb an additional 4 or 5 times.
WARNING DANGER
Inspect starting area for hazards such as rocks, glass, debris etc.
which could be contacted by the cutting attachment when starting.
Keep helpers and bystanders at least 15 m (50 ft.) from starting area,
otherwise serious personal injury may result.
C
B
SRM-2400SB
SRM-2100SB
C
B
A