Echo SRM-210 Brush Cutter User Manual


 
8
DESCRIPTION
The ECHO product you purchased has been partially assembled for your convenience. Due to packaging restrictions,
installation of the plastic debris shield, nylon line head, and positioning of the front handle are necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
* Some units may be factory pre-assembled. No assembly tools are needed and the nylon line head, plastic debris shield,
and mounting hardware, shown in the contents list, are pre-assembled to the unit. Only the front handle may need to be
re-positioned for comfortable operation.
CONTENTS
______1 - Power Head / Drive Shaft Assembly
______1 - Plastic Bag (co-pack)
______ - 1, Operator's Manual
______ - 1, Safety Manual
______ - 1, Warranty Registration Card
______ - 1, Limited Warranty Statement
______ - 1, Safety Glasses
______ - 1, 2-Stroke Oil Sample
* ___ - 1, Nylon Trimmer Head
* ___ - 1, wrench 17x14.5, P/N X602000030
* ___ - 2, locking tool, P/N 89751801131
* ___ --1, Plastic shield
* ___ --1, shield plate
* ___ --3, 5mm x 16mm screws (shield mtg.)
* _____ - 1, Large Washer
* _____ - 1, Split Pin
* _____ - 1, Nut, L.H. M10 x 1.25
______ - 12, 8 in. x .095 Pre-Cut Nylon Line