Filter
Top Products
GRASS TRIMMER/BRUSH CUTTER
OPERATOR'S MANUAL
13
NYLON LINE INSTALLATION
Tools Required: None
Parts Required: Two (2) Pre-cut Nylon Line 8 in. X .095 in.
1. Shut engine off. Lay unit on the ground with head assembly up.
2. Remove old nylon line through center recess of head.
3. Thread new lines through outside holes (A) in housing until ends
meet in center of recess.
NOTE
Insert cutting line ends to center of head recess to insure easy
removal of used lines.
FRONT HANDLE INSTALLATION
Tools Required: Screwdriver.
1. Position front handle for comfortable operation and secure screws.
A